Yamaha S90 ES Owner's Manual page 197

Setting parameters for Program Change transmission/recognition
• Enabling or disabling the sending of Bank Select and Program Change messages, when selecting a Voice or
Performance.
[UTILITY] [F5] MIDI [SF2] SWITCH
• Enabling or disabling selection of S90 ES Voices/Performances/Multis from an external MIDI device.
[UTILITY] [F5] MIDI [SF2] SWITCH
[MULTI/SEQ PLAY] (selecting Multi mode)
• Setting whether each Part playback sounds the internal tone generator or an external tone generator in the Sequence
Play mode.
[MULTI/SEQ PLAY] (selecting Sequence Play mode)
................................................................................................................................................................................ page 162
• Setting whether each Multi's Part playback sounds the internal tone generator or an external tone generator.
In the Multi mode, the transmit port depends on the last Chain Step settings selected in the Sequence Play mode.
Other Tips
• Loading the specified file on the USB storage device automatically when the power is turned on. ....................... page 106
• Setting the default display when turning the power on.
[UTILITY] [F1] GENERAL
• Selecting the output jack for each Drum key or Part. ................................................................................................ page 63
........................................................................................... page 166
BankSel, PgmChange
........................................................................................... page 166
BankSel, PgmChange
[EDIT] Part selection
Chain Step selection
.............................................................................................. page 164
[SF4] OTHER PowerOnMode
.............................................. page 159
[F5] RCV SW PgmChange
[F2] OUTPUT INT SW (Internal Switch), EXT SW (External Switch)
Application Index
197
Owner's Manual