Yamaha S90 ES Owner's Manual page 107

TIP Selecting programs from a computer
You can select Voices/Performances/Multis on this instrument from your computer software by specifying the following
MIDI messages. When changing the program in each mode, the following three MIDI messages must be transmitted to
the S90 ES.
• Bank Select MSB (Control change #000)
• Bank Select LSB (Control change #032)
• Program Change
For example, transmit the following MIDI messages to select the Voice of number 12 in the PRE2 in the Voice mode.
1
Transmit a Bank Select MSB (Control change #000) value of 63.
2
Transmit a Bank Select LSB (Controll change #032) value of 1.
3
Transmit a Program Change value of 12.
For details on what values are assigned to the Bank Select MSB/LSB and Program Change number of this synthesizer,
refer to the separate Data List.
n
When switching Voices in the same Bank or Performances, you can change a Voice or Performances by a Program Change message. When
switching Multis, you must transmit Bank Select MSB/LSB messages before a Program Change.
n
When switching the mode (e.g., changing the Voice mode to the Multi mode), transmit the proper Mode Change message (System Exclusive)
before the Bank Select MSB to the S90 ES (page 183).
Tips
107
Owner's Manual