Editing Performances In The Performance Play Mode (Quick Edit) - Yamaha S90 Owner's Manual

Editing
Performances in the
Performance Play
mode (Quick Edit)
The Performance Play mode lets you perform a variety
of general editing operations on the selected
performance. For more detailed and comprehensive
editing operations, use the Performance Edit mode.
n Parameters in the Performance Play mode and
Performance Edit mode having the same name also have
the same functions and settings.
[F2] Performance Play A/D
From this display you can make settings for the A/D
input parts. The A/D input feature lets you input
external audio (such as from a microphone or
guitar), then process and mix it with the other
sounds of the S90. The audio signal can be input via
the A/D INPUT jack or the mLAN terminal (if an
optional mLAN8E has been installed).
n For details about effect connection, see page 67.
n In the Utility mode, you can set whether you use the A/
D INPUT jack or the mLAN8E terminal as an input jack
for the A/D part ([F2]
• Volume
Determines the output level of the A/D part.
• Pan
Determines the stereo pan position of the A/D part.
• RevSend
Determines the Send level of the A/D part signal
sent to the Reverb effect.
• ChoSend
Determines the Send level of the A/D part signal
sent to the Chorus effect.
• VarSend(Variation Send)
Determines the Send level of the A/D part signal
sent to the Variation effect.
• DryLevel
Determines the level of the unprocessed A/D part
— in other words, the signal not affected by the
System Effects (Reverb, Chorus, Variation; Utility
[F1] [SF3] Ref. #21).
44
Playing Performances
[SF1] A/DSource Ref. #53).
• Mono/Stereo (mLAN Input)
Determines the signal configuration for the mLAN
audio (input), or how the signal or signals are routed
(stereo or mono). This parameter can be set only
when the mLAN terminal (with the optional
mLAN8E installed) is set as the input source for the
A/D part.
Settings
stereo
Audio received via mLAN terminal is processed in stereo.
L (left) mono
Audio received the L (left) channel via mLAN terminal is
processed in mono.
R (left) mono
Audio received the R (right) channel via mLAN terminal
is processed in mono.
L+R mono
Audio received via mLAN terminal is mixed and
processed in mono.
• OutputSel (Output Select)
Determines the output jack assignment for the A/D
part.
Settings (below)
LCD Output Jack
L&R OUTPUT L&R
as L&R ASSIGNABLE OUTPUT L&R
as1&2 mLAN8E ASSIGNABLE OUTPUT 3&4
as3&4 mLAN8E ASSIGNABLE OUTPUT 3&4
asL ASSIGNABLE OUTPUT L
asR ASSIGNABLE OUTPUT R
as1 mLAN8E ASSIGNABLE OUTPUT1
as2 mLAN8E ASSIGNABLE OUTPUT2
as3 mLAN8E ASSIGNABLE OUTPUT3
as4 mLAN8E ASSIGNABLE OUTPUT4
* Available only when the optional mLAN8E board has been installed.
[F3] Performance Play Voices
From this display you can select a voice for each
part and determine the note range it can be played
from (page 43).
[F4] Performance Play Portamento
From this display you can set the Portamento
parameters for each part (Performance Edit
[F1] [SF4] Ref. #7-10).
[F5] Performance Play EG (Envelope Generator)
Same as in Voice Play mode. See page 40.
[F6] Performance Play Arpeggio
This display contains the basic settings for Arpeggio
playback, including Type and Tempo (page 45).
Stereo/
Mono
Stereo
Stereo
Stereo
1 : L *
2 : R
Stereo
3 : L *
4 : R
Mono
Mono
Mono *
Mono *
Mono *
Mono *