Yamaha S90 ES Owner's Manual page 55

Editing a Performance by using the Control sliders
TIP
The four sliders at the top left of the instrument are not only for tweaking the sound while you perform—you can also
use them to edit a Performance, either in the Performance Play mode or the Performance Edit mode.
When the [PAN/SEND] indicator is turned on:
PAN Determines the stereo pan position of the Performance.
REVERB Determines the amount of Reverb effect that is applied to the
Performance.
CHORUS Determines the amount of Chorus effect that is applied to the
Performance.
TEMPO Determines the tempo of the Arpeggio assigned to the currently
selected Performance.
When the [TONE] indicator is turned on:
CUTOFF Raises or lowers the Filter cutoff frequency to adjust the tone brilliance.
RESONANCE Boosts or attenuates the level at the area around the Filter cutoff
frequency.
ATTACK Determines the attack time of the sound. For example, you can adjust a
strings Voice so that the sound gradually swells in volume by setting a
slow attack time—simply move the slider upwards.
RELEASE Determines the release time of the sound. Moving the slider upwards sets a
long release time and (depending on the Voice assigned to the selected
Performance) lets the sound sustain after the key is released. To produce a
sharp release, in which the sound abruptly cuts off, set a short release time.
n
The settings above are applied as offsets to the AEG and FEG settings in the Performance Edit mode.
When the [ARP FX] indicator is turned on:
SWING Adjusts the swing feel of the Arpeggio playback.
GATE TIME Adjusts the Gate Time (length) of the Arpeggio notes.
VELOCITY Adjusts the velocity of the Arpeggio notes.
UNITMULTIPLY Adjusts the Arpeggio playback time based on tempo.
When the [EQ] indicator is turned on:
LO Determines the amount of boost or attenuation applied to the low
frequency band of the Master EQ.
LO MID Determines the amount of boost or attenuation applied to the low-
midrange frequency band of the Master EQ.
HI MID Determines the amount of boost or attenuation applied to the high-
midrange frequency band of the Master EQ.
HI Determines the amount of boost or attenuation applied to the high
frequency band of the Master EQ.
n
The settings above are applied as offsets to the EQ settings in the [PERFORM]
OUT/MEF [SF2] MEQ (Master EQ) display.
When both the [PAN/SEND] and [TONE] indicators are turned on (by pressing them simultaneously):
ASSIGN A Adjusts parameters assigned to these sliders in the [UTILITY]
ASSIGN B
ASSIGN 1 Depends on the settings of the Voice assigned to the selected Performance.
ASSIGN 2
n
In addition to above functions, Master Effect related parameters (set in the [PERFORM]
MEF [SF3] MEF display) can be assigned to these four sliders by pressing the [ARP FX] and [EQ] buttons simultaneously. The particular
parameters are assigned to the four sliders can be set in the [UTILITY]
When the [VOLUME] indicator is turned on:
PART1 - 4 Adjusts the level balance among the Parts.
[PERFORM] Performance selection
[COMMON] [F2] OUT/MEF
[PERFORM] Performance selection
[COMMON] [F2] OUT/MEF
[PERFORM] Performance selection
[COMMON] [F2] OUT/MEF
[PERFORM] Performance selection
[PERFORM] Performance selection
[PERFORM] Performance selection
[PERFORM] Performance selection
(AEG)
[PERFORM] Performance selection
(AEG)
[PERFORM] Performance selection
[COMMON] [F3] ARP [SF3] PLAY FX
[PERFORM] Performance selection
[COMMON] [F3] ARP [SF3] PLAY FX
[PERFORM] Performance selection
[COMMON] [F3] ARP [SF3] PLAY FX
[PERFORM] Performance selection
[COMMON] [F3] ARP [SF3] PLAY FX
[PERFORM] Performance selection
[COMMON] [F1] GENERAL
[PERFORM] Performance selection
[COMMON] [F1] GENERAL
MID
[PERFORM] Performance selection
[COMMON] [F1] GENERAL
MID
[PERFORM] Performance selection
[COMMON] [F1] GENERAL
Performance selection
[F4] CTL ASN [SF2] ASSIGN display.
Performance selection
[F4] CTL ASN [SF5] MEF display.
[PERFORM] Performance selection
Part selection [F2] OUTPUT
Editing a Performance
[EDIT] Page 150
[SF1] OUT Pan
[EDIT] Page 150
[SF1] OUT RevSend
[EDIT] Page 150
[SF1] OUT ChoSend
[F6] ARP Tempo Page 149
[F5] EG CUTOF Page 149
[F5] EG RESO Page 149
[F5] EG ATK Page 149
[F5] EG REL Page 149
[EDIT] Page 151
Swing
[EDIT] Page 151
GateTimeRate
[EDIT] Page 151
VelocityRate
[EDIT] Page 151
UnitMultiply
[EDIT] Page 150
[SF3] MEQ OFS LOW
[EDIT] Page 150
[SF3] MEQ OFS LOW
[EDIT] Page 150
[SF3] MEQ OFS HIGH
[EDIT] Page 150
[SF3] MEQ OFS HIGH
[EDIT] [COMMON] [F2]
Page 165
Page 151
[COMMON] [F2] OUT/
[EDIT] Page 153
[SF1] VOL/PAN Volume
Owner's Manual
55