Yamaha S90 ES Owner's Manual page 81

2
Select the software to be remote-controlled (Mode A or Mode B).
Change the Mode by simultaneously holding down the [F6] SHIFT button and pressing the [REMOTE] button.
Mode A
3
Use the Control sliders and buttons on the S90 ES to remotely control the software.
The following explains which sequencer functions are assigned to which panel controls in the remote control.
n
For details about how to operate the Editor, refer to the PDF manual included the Editor.
Press the Control function
button to change the functions
assigned to the [F1] - [F6] and
[SF1] - [SF5] buttons (shown at
the bottom of the display).
Refer to the separate Data List.
PAN/SEND
ASSIGN
TONE
ARP FX
MEF
EQ
[J], [F], [I], [ I E], [G], [H] buttons
The six MODE buttons are used as transport controls, letting you start/stop playback of the DAW software on the computer.
[EDIT], [JOB], and [STORE] buttons
When the Mode is set to "General"
or "Cubase"
When the Mode is set to "Logic"
When the Mode is set to "SONAR"
When the Mode is set to "D.Perf"
[DRUM KIT] button
When the Mode is set to "General"
or "Cubase"
When the Mode is set to "Logic"
When the Mode is set to "SONAR"
When the Mode is set to "D.Perf"
Data dial, [INC/YES] and [DEC/NO] buttons
When the [DIAL] menu appears at
the [SF4] button
When the menu does not appear at
the [SF4] button
n
You can also move the song position by using the cursor [E] [F] buttons.
F 6
These dark bars serve as the cursor, indicating the
track/part currently being edited by the slider.
Moving the slider automatically moves the cursor to
the corresponding track/part.
The functions of the buttons on each DAW controller are assigned
to the [F1] - [F6] and [SF1] - [SF5] button on the S90 ES. The
functions to be assigned depend on the software selected in the
Mode A or B. For details, refer to the "Remote Control
Assignments." on page 83.
Not used.
These buttons perform the same functions as those of the [OPTION], [CONTROL] and [ALT] buttons on the Logic
Control.
These buttons perform the same functions as those of the [M2], [M3] and [M4] buttons on the Mackie Control.
These buttons perform the same functions as those of the [OPTION], [CONTROL] and [COMMAND] buttons on the
Mackie Control.
Not used.
The button can be used to switch the whether the track/slot number of DAW is displayed on the LCD or not.
The button can be used to switch the whether the track/slot number of DAW is displayed on the LCD or not.
The button can be used to switch the whether the send/effect number of DAW is displayed on the LCD or not.
These controls can be used to set the value for the knob of the DAW controller, for the track/part selected by the cursor.
The Control sliders can also be used, but these help you make fine adjustments to the value that are difficult to make
with the Control sliders.
The buttons can be used to move the song position in the DAW.
Using the S90 ES with computer software
REMOTE
Mode B
Indicates which DAW controller is
assigned to the Control sliders:
knobs or faders. Use the [VOLUME]
button to change the assignment.
Upper row indicates the setting
values for knobs/sliders 1 - 4
on the DAW controller.
Bottom row indicates the
setting values for knobs/sliders
5 - 8 on the DAW controller.
Owner's Manual
81