Setting Up The Printer; For A Network-Connected - Xerox WORKCENTRE 3210 User Manual

4
Double-click the MAC_Installer folder.
5
Double-click the Installer OSX icon.
6
Enter the password and click OK.
7
The Xerox Installer window opens. Click Continue
8
Select Uninstall and then click Uninstall.
9
The message which warns all application will close on your
computer appears, click Continue.
10
When the uninstallation is done, click Quit.
37
Using Your Printer with a Macintosh

Setting Up the Printer

Set up for your printer will be different depending on which cable you use
to connect the printer to your computer—the network cable or the USB
cable.

For a Network-connected

N : Some printers do not support a network interface. Before
OTE
connecting your printer, make sure that your printer supports a
network interface by referring to Printer Specifications in your
Printer User's Guide.
1
Follow the instructions on "Installing Software" on page 36 to install
the PPD and Filter files on your computer.
2 Open the Applications folder → Utilities, and Print Setup Utility.
• For MAC OS 10.5, open System Preferences from the
Applications folder, and click Printer & Fax.
3
Click Add on the Printer List.
• For MAC OS 10.5, press the "+" icon then a display window will
pop up.
4
For MAC OS 10.3, select the IP Printing tab.
• For MAC OS 10.4, click IP Printer.
• For MAC OS 10.5, click IP.
5
Select Socket/HP Jet Direct in Printer Type.
When printing a document containing many pages, printing
performance may be enhanced by choosing Socket for Printer
Type option.
6
Enter the printer's IP address in the Printer Address field.
7
Enter the queue name in the Queue Name field. If you cannot
determine the queue name for your printer server, try using the
default queue first.
8
For MAC OS 10.3, if Auto Select does not work properly, select
Xerox in Printer Model and your printer name in Model Name.
• For MAC OS 10.4, if Auto Select does not work properly, select
Xerox in Print Using and your printer name in Model.
• For MAC OS 10.5, if Auto Select does not work properly, select
Select a driver to use... and your printer name in Print Using.
Your printer's IP address appears on the Printer List, and is set as
the default printer.
9
Click Add.