Removing Printer Software - Xerox WORKCENTRE 3210 User Manual

N
: If your printer is not already connected to the computer, the
OTE
following window will appear.
• After connecting the printer, click Next.
• If you don't want to connect the printer at this time, click Next, and No
on the following screen. Then the installation will start and a test page
will not be printed at the end of the installation.
• The reinstallation window that appears in this User's Guide may
differ depending on the printer and interface in use.
5
Select the components you want to reinstall and click Next
If you installed the printer software for local printing and
select your printer driver name, the window asking you to print a
test page appears. Do as follows:
a. To print a test page, select the check box and click Next
b. If the test page prints out correctly, click Yes.
If it doesn't, click No to reprint it.
6
When the reinstallation is done, click Finish.
.
you
.
10
Installing Printer Software in Windows

Removing Printer Software

1
Start Windows.
2 From the Start menu select Programs or All Programs → your
printer driver name → Maintenance.
3
Select Remove and click Next.
You will see a component list so that you can remove any item
individually.
4
Select the components you want to remove and then click Next.
5
When your computer asks you to confirm your selection, click Yes.
The selected driver and all of its components are removed from
your computer.
6
After the software is removed, click Finish.