Customizing Scan To Usb; Printing From A Usb Memory Device; To Print A Document From A Usb Memory Device; Backing Up Data - Xerox WORKCENTRE 3210 User Manual

Xerox all in one printer user manual
Hide thumbs Also See for WORKCENTRE 3210:
Table of Contents

Advertisement

6. Press OK when Yes appears to scan more pages. Load an original and
press Start
.
Regardless of the button you press, the color mode is decided as
customized. See "Customizing Scan to USB" on page 59.
Otherwise, press the left/right arrow to select No and press OK.
After scanning is complete, you can remove the USB memory device from
the machine.

Customizing Scan to USB

You can specify image size, file format, or color mode for each scanning to
USB job.
1. Press
Scan/Email.
2. Press Menu
until Scan Feature appears on the bottom line of the
display and press OK.
3. Press OK when USB Memory appears.
4. Press the left/right arrow until the setting option you want appears and
press OK.
You can set the following options:
Scan Size: Sets the image size.
Original Type: Sets the original document's type.
Resolution: Sets the image resolution.
Scan Color: Sets the color mode. If you select Mono in this option,
you cannot select JPEG in Scan Format.
Scan Format: Sets the file format in which the image is to be saved.
When you select TIFF or PDF, you can select to scan multiple
pages. If you select JPEG in this option, you cannot select Mono in
Scan Color.
5. Press the left/right arrow until the desired status appears and press OK.
6. Repeat steps 4 and 5 to set other setting options.
7. When you have finished, press Stop/Clear
You can change the default scan settings. For details, see page 45.

PRINTING FROM A USB MEMORY DEVICE

You can directly print files stored on a USB memory device. You can print
TIFF, BMP, JPEG, PDF, and PRN files.
Direct Print option supported file types:
PRN: Xerox PCL 6 compatible.
PRN files can be created by selecting the Print to file check box when
you print a document. The document will be saved as a PRN file, rather
than printed on paper. Only PRN files created in this fashion can be
printed directly from USB memory. See the Software section to learn
how to create a PRN file.
BMP: BMP Uncompressed
TIFF: TIFF 6.0 Baseline
JPEG: JPEG Baseline
PDF: PDF 1.4 and below (WorkCentre 3220 only)

To print a document from a USB memory device:

1. Insert a USB memory device into the USB memory port on your
machine.
2. Press Direct USB
.
Your machine automatically detects the device and reads data stored on it.
3. Press the left/right arrow until USB Print appears and press OK.
to return to ready mode.
4. Press the left/right arrow until the folder or file you want appears and
press OK.
If you see D in the front of a folder name, there are one or more files or
folders in the selected folder.
5. If you selected a file, skip to the next step.
If you selected a folder, press the left/right arrow until the file you want
appears.
6. Press the left/right arrow to select the number of copies to be printed or
enter the number.
7. Press Start
to start printing the selected file.
After printing the file, the display asks if you want to print another job.
8. Press OK when Yes appears to print another job, and repeat from step 2.
Otherwise, press the left/right arrow to select No and press OK.
9. Press Stop/Clear
to return to ready mode.
Can choose paper size and tray when printing. See "Setting the paper
size and type" on page 38.

BACKING UP DATA

Data in the machine's memory can be accidentally erased due to power
failure or storage failure. Backup helps you protect your Address Book
entries and the system settings by storing them as backup files on a USB
memory device.
Backing up data
1. Insert the USB memory device into the USB memory port on your
machine.
2. Press Menu
until System Setup appears on the bottom line of the
display and press OK.
3. Press OK when Machine Setup appears.
4. Press the left/right arrow until Export Setting appears and press OK.
5. Press the left/right arrow until the option you want appears.
Address Book: Backs up all Address Book entries.
Setup Data: Backs up all system settings.
6. Press OK to begin backing up the data.
The data is backed up to the USB memory.
7. Press Stop/Clear
to return to ready mode.

Restoring data

1. Insert the USB memory device on which the backup data is stored in to
the USB memory port.
2. Press Menu
until System Setup appears on the bottom line of the
display and press OK.
3. Press OK when Machine Setup appears.
4. Press the left/right arrow until Import Setting appears and press OK.
5. Press the left/right arrow until the data type you want appears and press
OK.
6. Press the left/right arrow until the file containing the data you want to
restore appears and press OK.
7. Press OK when Yes appears to restore the backup file to the machine.
8. Press Stop/Clear
to return to ready mode.
Using USB flash memory_ 59

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents