Loading Originals And Print Media; On The Scanner Glass; In The Adf - Xerox WORKCENTRE 3210 User Manual

Xerox all in one printer user manual
Hide thumbs Also See for WORKCENTRE 3210:
Table of Contents

Advertisement

loading originals and print media

This chapter introduces you how to load originals and print media into your machine.
This chapter includes:
Loading originals
Selecting print media
Changing the size of the paper in the paper tray
Loading paper
LOADING ORIGINALS
You can use the scanner glass or ADF to load an original for copying,
scanning, and sending a fax.

On the scanner glass

Make sure that no originals are in the ADF. If an original is detected in the
ADF, the machine gives it priority over the original on the scanner glass. To
get the best scan quality, especially for colored or gray-scaled images, use
the scanner glass.
1. Lift and open the scanner lid.
2. Place the original face down on the scanner glass and align it with the
registration guide at the top left corner of the glass.
32 _Loading originals and print media
Printing on special print materials
Adjusting the output support
Setting the paper size and type
3. Close the scanner lid.
Leaving the scanner lid open while copying may affect copy quality
and toner consumption.
Dust on the scanner glass may cause black spots on the printout.
Always keep it clean.
If you are copying a page from a book or magazine, lift the scanner
lid until its hinges are caught by the stopper and then close the lid.
If the book or magazine is thicker than 30 mm, start copying with
the lid open.

In the ADF

Using the ADF, you can load up to 50 sheets of paper (75 g/m
for one job.
When you use the ADF:
Do not load paper smaller than 142 x 148 mm (5.6 x 5.8 inches) or
larger than 216 x 356 mm (8.5 x 14 inches).
Do not attempt to load the following types of paper:
- carbon-paper or carbon-backed paper
- coated paper
- onion skin or thin paper
- wrinkled or creased paper
- curled or rolled paper
- torn paper
Remove all staples and paper clips before loading.
Make sure any glue, ink, or correction fluid on the paper is completely
dry before loading.
Do not load originals that include different sizes or weights of paper.
Do not load booklets, pamphlets, transparencies, or documents having
other unusual characteristics.
1. Flex or fan the edge of the paper stack to separate the pages before
loading originals.
2
, 20 lb bond)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents