Printing On Both Sides Of Paper; Setting Copy Timeout - Xerox WORKCENTRE 3210 User Manual

Xerox all in one printer user manual
Hide thumbs Also See for WORKCENTRE 3210:
Table of Contents

Advertisement

PRINTING ON BOTH SIDES OF PAPER

You can set the machine to print documents on both sides of paper.
(WorkCentre 3220 only)
1. Press Copy
.
2. Press Menu
until Copy Setup appears on the bottom line of the
display and press OK.
3. Press the left/right arrow until Duplex Print appears and press OK.
4. Press the left/right arrow until the binding option you want appears.
Off: Copys in Normal mode.
Short Edge: Copys pages to be read by flipping like a note pad.
Long Edge: Copys pages to be read like a book.
5. Press OK to save your selection.

SETTING COPY TIMEOUT

You can set the time the machine waits before it restores the default copy
settings, if you do not start copying after changing them on the control
panel.
1. Press Menu
until System Setup appears on the bottom line of the
display and press OK.
2. Press OK when Machine Setup appears.
3. Press the left/right arrow until Timeout appears and press OK.
4. Press the left/right arrow until the time setting you want appears.
Selecting Off means that the machine does not restore the default
settings until you press Start
cancel.
5. Press OK to save your selection.
6. Press Stop/Clear
to return to ready mode.
42 _Copying
to begin copying, or Stop/Clear
to

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents