Setting Up The Printer For Wireless Lan Wpa-Enterprise - Xerox WorkCentre 3615 System Administrator Manual
Black and white multifunction printer
Hide thumbs
Also See for WorkCentre 3615:
- User manual (214 pages) ,
- System administrator manual (118 pages) ,
- Quick use manual (21 pages)
Table of Contents
Advertisement
Network Connectivity
14. To print a record of the IP settings, click Print Printer Settings.
15. Click Finish.
When the printer restarts, it uses the information from Printer Setup Utility to connect with the
wireless router.
16. If the Ethernet cable is connected to the printer, disconnect it.
17. Wait approximately two minutes, then print a Configuration Report to check the connection.
If the printer does not successfully connect with the wireless network, check your network
information and try again.
Setting Up the Printer for Wireless LAN WPA-Enterprise
WPA-Enterprise Encryption is supported only when Infrastructure is selected as the Network Type in
the Wi-Fi settings section.
Note:
To manage digital certificates, enable the Device Memory Data Encryption and HTTPS
communication.
1.
Import the certificate to use with the wireless LAN. For details, see
page 79.
Note:
Use Internet Explorer to import the certificate from Windows. Use Safari to import certificates
from Macintosh.
2.
Configure the digital certificate Purpose for wireless LAN (server or root certificate). For details, see
Configuring the Digital Certificate Purpose
3.
Verify the Certificate Authorities within the Category. For details, see
Certificate Purpose
4.
Configure WPA-Enterprise for PEAPVO-MS-CHAPV2, EAP-TLS, EAP-TTLS PAP, or EAP-TTLS CHAP.
a.
At your computer, open a Web browser, in the address field, type the IP address of the printer,
then press Enter or Return.
Click Properties.
b.
c.
In the left navigation panel, scroll down to Physical Connection, then select Wi-Fi.
Configure the SSID.
d.
e.
At Network Type, select Infrastructure.
f.
In the Security Settings section, select one of the following:
•
WPA-Enterprise-AES/WPA2-Enterprise-AES
•
WPA-Enterprise-TKIP
g.
In the WPA-Enterprise section, configure the EAP Identity, Login Name, and Password.
h.
From the Authentication Method list, select one of the following:
•
PEAPVO-MS-CHAPV2
•
EAP-TLS
•
EAP-TTLS PAP
•
EAP-TTLS CHAP
Click Save Changes.
i.
®
40
Xerox
WorkCentre
System Administrator Guide
on page 80.
®
3615 Black and White Multifunction Printer
on page 79.
Importing a Digital Certificate
Verifying the Digital
on
Hide quick links:
Advertisement
Table of Contents
