Xerox WORKCENTRE 3210 User Manual page 103

4
Select Typical installation for a network printer. Click Next.
5
The list of printers available on the network appears. Select the
printer you want to install from the list and then click Next.
• If you do not see your printer on the list, click Update to refresh
the list, or select Add TCP/IP Port to add your printer to the
network. To add the printer to the network, enter the port name
and the IP address for the printer.
To verify your printer's IP address or the MAC address, print a
Network Configuration page.
• To find a shared network printer (UNC Path), select Shared
Printer [UNC] and enter the shared name manually or find a
shared printer by clicking the Browse button.
N : If you cannot find your machine in network, please turn off the
OTE
firewall and click Update.
For Windows operating system, Start → Control Panel and start
windows firewall, and set this option unactivated. For other operating
system, refer to its on-line guide.
6
After the installation is finished, click Finish. If you choose to print a
test page, select the checkbox.
7
If the test page prints out correctly, click Yes.
If not, click No to reprint it.
7
Installing Printer Software in Windows
8
Click Finish.
N : After setup is complete, if your printer driver doesn't work
OTE
properly, reinstall the printer driver. See "Reinstalling Printer Software"
on page 9.
Custom Installation
You can choose individual components to install and set a specific IP
address.
1
Make sure that the printer is connected to your network and
powered on. For details about connecting to the network, see the
supplied printer's User's Guide.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation window
appears.
If the installation window does not appear, click Start and then
Run. Type X:\Setup.exe, replacing "X" with the letter which
represents your drive and click OK.
If you use Windows Vista, click Start → All programs →
Accessories → Run, and type X:\Setup.exe.
If the AutoPlay window appears in Windows Vista, click Run
Setup.exe in Install or run program field, and click Continue in
the User Account Control window.
3
Click Install Software.