Dynamic/Static Ip Addresses And Wins; Before You Start - Xerox 480 ST System Administration Manual

3. Dynamic/Static IP Addresses and
WINS

Before you start

NOTE
Xerox Document Centre System Administration Guide
Your Document Centre now has DHCP, LPR, and NetBIOS over
the IP protocol enabled by default. If your DHCP server will
provide host name, IP address, Gateway address, and Subnet Mask,
the Document Centre TCP/IP information will be configured on
initial boot.
Your Document Centre printer can be connected to a variety of
networks that use the TCP/IP protocol. You may either choose to
allow the device to retrieve a dynamic address or you may select to
enter one manually. This section contains procedures for both of
these methods. Determine which method will be used for your
network and follow the steps of the appropriate procedure.
Page 3 - 1