Go To The Workstations And - Xerox 480 ST System Administration Manual

Go to the workstations and...

Xerox Document Centre System Administration Guide
1. Verify that the NetBEUI protocol is loaded (ALL Windows
3.11 or greater versions).
2. Use the CentreWare Network Services CD-ROM to install
print drivers on a Windows-based workstation. Details for
this are found in the document supplied with your printer
entitled CentreWare Network Services Guide.
3. On the Configuration Report review the NetBIOS: area and
note the Workgroup, Host Name, and Printer Name.
Windows for Workgroups Users
• Open the Control Panel and double-click the Printers icon.
• Select the printer driver you just installed and click Connect.
• Select an available port and click Network.
• Double-click the name of the WorkGroup for the printer.
• Double-click the Host Name of the printer.
• Click once on the Printer Name then click OK.
Page 8 - 5