Table of Contents
Advertisement
Xerox Document Centre System Administration Guide
NetWare
To specify NetWare settings:
1.
Open your Web browser and enter the TCP/IP address of the
Document Centre in the Address or Location field.
2.
Click the Properties tab or click Properties in the directory
tree.
3.
Select Connectivity, then select Protocols in the directory
tree.
4.
Select NetWare in the directory tree.
5.
Select Protocol Enabled to enable NetWare.
6.
If your Document Centre has an enabled token ring card, select
either Ethernet or Token Ring from the Physical Connection
drop-down list.
• Select an Ethernet or Token Ring Frame Type from the drop-
down list.
7.
Type a polling rate for the print server (1 - 65536 seconds) in
Queue Poll Interval.
Page 16 - 53
Advertisement
Table of Contents
Troubleshooting
