Go To The Document Centre And - Xerox 480 ST System Administration Manual

Go to the Document Centre and...

Page 13 - 2
1. Connect your Document Centre to the network with the
appropriate cabling.
2. Enter the Tools pathway.
a) Press the Access (
b) On the keypad enter 1111 or the current password. Press
the Enter button when finished. The Touch Screen will
be used for the remainder of the data entry, unless
instructed otherwise.
c) Press the Go to Tools button.
3. Enable Microsoft Network printing.
a) Wait for the screen to refresh and press the Connectivity
and Network Setup button.
b) Wait for the screen to refresh and press the Network
Setup button.
4. Enable the Protocol and Media.
a) At the next screen, press the Microsoft Networks
button.
b) At the next screen, press the Transport and Media
button.
c) At the next screen, press the Enable button to enable the
Microsoft Network protocols.
d) If Physical Media buttons appear, press the
corresponding button to select either
NetBEUI/Ethernet or NetBEUI/Token Ring. Press
Save.
or ) button.
Xerox Document Centre System Administration Guide