Test Scanning - Xerox 480 ST System Administration Manual

Test scanning

Page 20 - 30
A. Place the document that you want to scan in the Document
Feeder, or place the first page on the Document Glass.
B. Select the Scan feature on the Document Centre Touch
Screen.
C. Scan jobs are based on templates that contain programming
selections for your job. Verify that default.xst is highlighted
in the scan template list. This is the default template.
D. If desired, select More Scanning Features and modify the
template by selecting options from the Scan Setups tab on the
Document Centre Touch Screen. Note that any changes you
make from the Touch Screen apply only to the current job.
The template settings will be restored after the completion of
the scan job.
Xerox Document Centre System Administration Guide