Xerox 480 ST System Administration Manual page 130

Category Setting
Basic Original Type
Auto Exposure
Sides Imaged
Document Original Size
Options
Image Lighten/Darken
Adjustment
Contrast
Sharpen/Soften
Graphics
Page 16 - 24
The following table shows the available scan settings that can be
defined in a template and a description of each.
Auto (default) automatically detects the type of original.
Text indicates that the original is text or line art.
Photo indicates that the original is a photograph.
Used for enhancing documents with colored backgrounds by
adjusting for different types of images.
On (checkbox selected) selects an appropriate exposure level
for the original document.
Off (checkbox deselected) uses the Lighten/Darken setting for
the exposure level.
Print the image on one side or two sides of the paper.
Selects the page dimensions of the scanned image to match the
original size.
Normal specifies a standard size (Letter or A4).
Pre-set specifies a pre-defined size.
Custom specifies a size that you set.
Auto varies dimensions of the scanned image to match the
original size automatically.
Lightens or darkens the brightness of the printed image.
Adjusts the clarity (difference in gray shades) of the printed
image. Increased contrast makes the image more defined in
black and white. Decreased contrast makes the image more
defined in gray tones.
Softens or makes the edges of the printed image more
pronounced.
Normal sets the continuous-tone reproduction to 106 dpi
screens.
Emulate DocuTech allows Xerox DocuTech users to set the
continuous-tone reproduction to emulate the DocuTech at a
lower 85 dpi screen setting.
Description
Xerox Document Centre System Administration Guide