Xerox 480 ST System Administration Manual page 198

Category Setting
Basic Original Type Auto (default) automatically detects the type of original. Text
Auto
Exposure
Sides Imaged Prints the image on one or two sides of the paper.
Document Original Size Selects the page dimensions of the scanned image to match the
Options
Image Lighten/Dark
Adjust- en
ment
Contrast
Graphics
Sharpen/Soft-
en
Image Resolution
Options
Edge Erase
Page 16 - 92
Scan Settings
The following table shows the available scan settings that can be
defined in a template and a description of each.
indicates that the original is text or line art. Photo indicates that
the original is a photograph.
Used for enhancing documents with colored backgrounds by
adjusting for different types of images. On (checkbox selected)
selects an appropriate exposure level for the original document.
Off (checkbox deselected) uses the Lighten/Darken setting for
the exposure level.
original size. Normal specifies a standard size (Letter or A4).
Pre-set specifies a pre-defined size. Custom specifies a size
that you set.
Lightens or darkens the brightness of the printed image.
Adjust the clarity (difference in gray shades) of the printed
image. Increased contrast makes the image more defined in
black and white. Decreased contrast makes the image more
defined in gray tones.
Normal sets the continuous-tone reproduction to 106 dpi screens.
Emulate DocuTech allows Xerox DocuTech users to set the
continuos-tone reproduction to emulate the DocuTech at a lower 85
dpi screen setting.
Softens or makes the edges of the printed image more
pronounced.
Prints the image in a selected number of dots per inch (dpi). A
higher dpi, such as 600 x 600, produces a higher quality image,
but creates a larger file size.
Erases the left/right/top/bottom margins of the document.
Description
Xerox Document Centre System Administration Guide