Xerox 480 ST System Administration Manual page 160

NOTE
Page 16 - 54
8. Type the Print Server Name.
9. Type a New Print Server Password for the print server and
then type it again to confirm in Retype Password.
10. Select Protocol Enabled to enable SAP (Service Advertising
Protocol).
11. Type the SAP Frequency (from 15 -300 seconds or enter 0 for
none).
12. For NetWare Bindery, type the names of up to four primary
File Servers for the Document Centre.
13. For NetWare NDS (NetWare Directory Services), type a direc-
tory tree and context for the Document Centre in NDS Tree
and NDS Context.
14. Click Apply New Settings to accept the changes or Restore
Settings to return the settings to their previous values.
The settings are not applied until you restart the Document Centre.
Xerox Document Centre System Administration Guide