Obtain Machine Information; Static Ip Address - Xerox 4112 Instruction Manual

Machine setup
4. From Local Area Connections, select the Support tab; your computer's IP address is listed
there.
5. Record the computer's IP address; this will be used later in this chapter.
6. Close the Local Area Connections Status window. Close the Network Connections and
Control Panel windows, if applicable.

Obtain machine information

Static IP address

Obtain your machine's static IP address by performing the following steps:
Note
It is recommended that you use a static IP address on your machine (versus a DHCP
address). If your machine uses DHCP, you must specify the DNS host name; this is discussed in
the section entitled Machines using DHCP on page 2-3.
1. From the machine's User Interface (UI), press the Machine Status button on the Control
Panel.
2. From the Machine Information tab, select Print Reports...
3. Select Copy Reports, Configuration Report, and then press the Start button on the
Control Panel.
4. Collect the printed Configuration Report from the machine's exit area.
5. After the report is printed, select Close until you are returned to the Machine Information
tab (Tools) on the machine's UI.
6. Press the Services button on the Control Panel to exit Machine Status.
7. On the printed Configuration Report, locate and record the machine's host/domain name.
2-2
Xerox 4112/4127 Copier/Printer
Backup/restore/migrate tools