NOTE
Xerox Document Centre System Administration Guide
5.
Click Edit SNMP Properties. You will be prompted for the
the Administrator name and password. Enter these and click
OK.
6.
Enter a name (up to 256 characters) for the GET Community
Name. The default is public.
7.
Enter a name (up to 256 characters) for the SET Community
Name. The default is private.
If you change the GET and/or SET Community Names, you must
change all network applications that are communicating via SNMP
with this Document Centre to use the new GET/SET names.
8.
Enter a name (up to 256 characters) for the default TRAP
Community Name. The default is SNMP_trap.
Page 16 - 59