Xerox 480 ST System Administration Manual page 304

E-mail Authentication
Page 21 - 16
For login in authentication you must enable it at the Document
Centre 490/480/470/460 ST Control Panel. Complete the following
steps:
1. Enter the Tools pathwa. y
a) Press the Access (
b) On the keypad enter 1111 or the current password. Press
the Enter button when finished. The Touch Screen will
be used for the remainder of the data entry, unless
instructed otherwise.
c) Press the Go to Tools button.
2. Set up Authentication:
a) Select More. (up to 2 times).
b) Select Service Access Control.
c) Select Network Authenticated Access.
d) Select Guest Access and Guest Passcode.
e) Select Next.
f) Select Save.
g) Select Exit Tools.
3. Print a Configuration Sheet and verify the settings against the
information that was entered.
or ) button.
Xerox Document Centre System Administration Guide