Page 8 - 6
Windows 95/98, Windows NT 4.0 WorkStation and
Windows 2000 Users
•
Click the Start button and select Settings.
•
From the cascade menu select Printers.
•
Select a printer with the right mouse button.
•
Select the Properties entry in the cascade menu.
•
Select the Details tab on the Properties dialog.
•
Click the Add Port button and browse to the Workgroup.
•
Double click the name of the WorkGroup for the printer as
shown on the Configuration Report.Double click the Host
Name of the printer as shown on the Configuration Report.
•
Click once on the Printer Name then click OK.
•
Open an application and print a test page to verify operation.
•
If your print job does not print, refer to the Troubleshooting
section of this document to solve the problem.
Xerox Document Centre System Administration Guide