Siemens SINUMERIK 840D sl Function Manual page 724

Detailed description
2.10 System settings for power-up, RESET/part-program end and part-program start
• After power-up (POWER ON)
Bits 4 - 13 can be combined optionally.
Figure 2-17
166
MD20110 $MC_RESET_MODE_MASK, Bit 0 = 0 or 1
System settings after RESET/part program end and part program start
Basic logic functions: Mode group, channel, program operation, reset response (K1)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0