Siemens SINUMERIK 840D sl Function Manual page 511

Output after motion
• The traverse movements (path and/or block-related positioning axis movements) of the
• The auxiliary functions are output after completion of the traverse movements.
• The block change is performed after acknowledgment of the auxiliary functions by the
2.1.5 Examples of output behavior
Inputs
The following figures illustrate the differing behavior regarding:
• Output and acknowledgment of the auxiliary function
• Spindle response (speed change)
• Traverse movement (velocity change)
Parameterized output behavior
The binary values specified in the examples under "Spec" refer to the parameterized output
behavior:
MD22080 $MC_AUXFU_PREDEF_SPEC[ index ] (output specification)
Basic logic functions: Auxiliary Function Output to PLC (H2)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
current part program block end with an exact stop.
PLC:
– Output duration one OB1 cycle (normal acknowledgment): after one OB1 cycle
– Output duration one OB40 cycle (quick acknowledgment): after one OB40 cycle
Detailed description
2.1 Predefined auxiliary functions
23