Siemens SINUMERIK 840D sl Function Manual page 341

Brief Description
Customer benefit
The "Travel to fixed stop" function can be used for operations such as traversing tailstocks or
sleeves to an end limit position in order to clamp workpieces.
Features
• The clamping torque and a fixed stop monitoring window can be programmed in the parts
• The "travel to fixed stop" function can be implemented for axes as well as for spindles
• The function can be implemented for several axes simultaneously and parallel to the
• Torques or the power can be adjusted to a specific setting.
• Travel with limited torque/power (Force Control, FOC) can be activated.
• The "travel to fixed stop" functions can be enabled from synchronized actions.
• Block search with calculation, multichannel (SERUPRO).
• Vertical axes can also be moved with FXS to a fixed stop.
• With SW 6.4 and higher, VDI signals can be used to set a REPOS offset for each axis and
Basic logic functions: Travel to fixed stop (F1)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
program and can also be altered via setting data once the fixed stop has been reached.
with axistraversing capability.
motion of other axes.
Move axes with FXS and FOC in simulation mode.
display the FXS status currently active on the machine after the search target has been
located.
1
5