Avaya S8800 Maintaining page 29

1
2
3
4
5
6
2. Press down on the riser-card assembly. Make sure that the assembly is fully seated in the
riser-card connector on the system board.
3. Install the cover.
May 2014
Removing and installing a PCI riser-card assembly
PCI riser connector 2
PCI riser-card assembly 2
PCI riser-card assembly 1
Alignment slots
Alignment brackets
PCI riser connector 1
Maintaining the Avaya S8800 2U Server for Message Networking
Comments? infodev@avaya.com
29