Installing The Server Cover - Avaya S8800 Maintaining

Removing and installing the server cover
1
5. Slide the cover toward the back of the server until the cover has disengaged from the
chassis.
6. Lift the server cover off the server and set it aside.
Important:
For proper cooling and airflow, replace the cover before you turn on the server.
Operating the server for extended periods of time (over 30 minutes) with the cover
removed might damage server components.

Installing the server cover

About this task
Important:
Always use an electrostatic-discharge wrist strap or other grounding system when you work
inside the server. For more information, see
Maintaining the Avaya S8800 2U Server for Message Networking
16
Cover release latch
Protecting against ESD damage
Comments? infodev@avaya.com
on page 10.
May 2014