Replacing a PCIe card
4. Reconnect the external cables and power cords.
5. Turn on the attached devices and the server.
Replacing a PCIe card
Removing a PCIe card
Before you begin
Remove the PCI riser-card assembly.
About this task
Important:
Always use an electrostatic-discharge wrist strap or other grounding system when you work
inside the server. For more information, see
Procedure
Carefully grasp the card by its top edge or upper corners, and pull the card from the PCI
expansion slot. See the following figure.
1
2
3
Maintaining the Avaya S8800 2U Server for Message Networking
30
Protecting against ESD damage
PCIe card
PCI riser-card assembly
PCI card connectors
Comments? infodev@avaya.com
on page 10.
May 2014