Avaya S8800 Maintaining page 68

Replacing a power supply
1
2
5. Route the power cord through the handle so that the power cord does not accidentally
become unplugged.
6. Connect the power cord for the new power supply to the power-cord connector on the power
supply.
7. Connect the other end of the power cord to a properly grounded electrical outlet.
8. Make sure that both the AC LED and the DC LED on the power supply light up.
Both LEDs light up when the power supply is operating correctly.
Maintaining the Avaya S8800 2U Server for Message Networking
68
Power supply
Power supply release tab
Comments? infodev@avaya.com
May 2014