Avaya S8800 Maintaining page 23

1
2
2. Touch the static-protective package that contains the memory module to any unpainted
metal surface on the server.
3. Remove the memory module from the package.
4. Turn the memory module so that the memory module keys align correctly with the connector.
5. Insert the memory module into the connector by aligning the edges of the memory module
with the slots at the ends of the memory module connector.
6. Firmly press the memory module straight down into the connector by applying pressure on
both ends of the memory module simultaneously.
The retaining clips snap into the locked position when the memory module is firmly seated in
the connector.
Important:
If there is a gap between the memory module and the retaining clips, the memory
module has not been correctly inserted. Open the retaining clips, remove the memory
module, and then reinsert it.
7. Replace the air baffle over the memory modules. Make sure all cables are out of the way.
8. Replace the PCI riser-card assembly 1, if you removed it.
9. Install the cover.
10. Reconnect the external cables and power cords.
May 2014
Memory module
Retaining clip
Maintaining the Avaya S8800 2U Server for Message Networking
Comments? infodev@avaya.com
Installing a memory module
23