Komatsu D61EX-24 Operation & Maintenance Manual page 84

OPERATION EXPLANATION OF COMPONENTS
PARKING BRAKE PILOT LAMP
The parking brake pilot lamp lights up when the parking brake
lever is in LOCK position.
It goes out when the parking brake lever is set to FREE posi-
tion.
When the parking brake lever needs to be set to LOCK posi-
tion, the parking brake pilot lamp flashes.
FLOATING MODE PILOT LAMP
The float mode pilot lamp lights up when the machine is in the
float mode.
How to set FLOAT mode
Operate the blade control lever to LOWER stroke end while
pressing FLOAT button on top of the blade control lever.
How to cancel FLOAT mode
Operate the blade control lever from HOLD position to RAISE
or LOWER position.
REMARK
When FLOAT mode is set or canceled, electronic sound of
beep is heard.
BLADE MODE DISPLAY
The currently set blade mode is displayed on the blade mode
display.
The display of the blade mode is as follows.
(A): For fast operation
Lights up when it is set to FAST mode.
(B): For general operation
Lights up when it is set to NORMAL mode.
(C): For last leveling operation
Lights up when it is set to FINE mode.
Press customize switch to set the blade mode.
For details of the setting method, see "CUSTOMIZE SWITCH".
STEERING MODE DISPLAY
The currently set steering mode is displayed on the steering
mode display.
The display of the steering mode is as follows.
(A): Lights up when the mode is set to NORMAL mode.
(B): Lights up when the mode is set to FINE mode.
Steering mode is set by depressing the customize switch.
For details of the setting method, see"CUSTOMIZE SWITCH".
3-33