Komatsu D61EX-24 Operation & Maintenance Manual page 161

EXPLANATION OF COMPONENTS
FUSE
NOTICE
When replacing the fuse, be sure to turn the starting switch to OFF position and, after confirming that
the system operating lamp is not lit, set the battery disconnect switch key to OFF position.
• The fuses protect the electrical component and wiring from burning out.
• If the fuse becomes corroded, or looks white powdery, or the fuse is loose in the fuse holder, replace the
fuse.
• Replace the fuse with the one of the same capacity.
Remove fuse box cover (1) under the left side of the operator's
seat, and fuse boxes (A) and (B) are seen.
Fuse box (C) is installed to the overhead panel.
3-110
OPERATION