Table of Contents
Advertisement
MACHINE OPERATIONS AND CONTROLS
METHOD FOR CHECKING FUEL LEVEL, ADDING FUEL
When adding fuel, never spill the fuel or let it overflow. This may cause fire.
If any fuel has spilled, wipe it up completely. If fuel has spilled over soil or sand, remove that soil or
sand.
Fuel is highly flammable and dangerous. Do not bring any open flame close.
When performing operations on slopes, to prevent the engine from sucking in air, pay careful attention to the
amount of fuel remaining in the tank.
1.
Turn the starting switch to ON position (B).
2.
Check the remaining level by the fuel gauge on the ma-
chine monitor.
•
When the pointer is in green range (a) to (c)
The fuel level is proper.
•
When the pointer is in red range (a) to (b)
The fuel is insufficient. Turn the starting switch back to
OFF position (A), and add fuel through fuel filler port
(F).
Fuel tank capacity: 372 ℓ {98.3 U.S.Gal}
After adding, tighten the cap securely.
3-160
k
k
WARNING
OPERATION
Advertisement
Chapters
Table of Contents
