Table of Contents
Advertisement
OPERATION
CHECK MESSAGE
1.
On the standard screen, press switch F6.
When there is any message, message display (1) lights
up.
While message display (1) is lit, press switch F6, and the
mail confirmation menu (g) directly opens.
Select the mail confirmation menu (g), and you can read
the received message.
2.
If a message requests reply, the "Numeric Input: []" box (2)
is displayed. Make any reply to the message.
REMARK
•
(3) is the subject of the received message. When no
message is received, "No message." is displayed in
place (3).
•
(4) is the serial number of received messages.
REPLY TO MESSAGE
1.
Input the selected item number in the "Numeric Input: []" box (2) on the screen of mail confirmation menu
(g).
The selected item number is written in place (5) of the
message text.
•
Input the number by using the monitor panel switch.
Each switch corresponds to the value shown on the
right side below the switch.
•
If you input an incorrect number, press switch F5, and
you can clear an input character at a time.
•
If switch F5 is pressed when the input column is blank,
the screen returns to the standard screen.
2.
After inputting a selected item number, press switch F6.
3.
When the message "Do you send Numeric Input?" is dis-
played in the column (2) of the mail confirmation menu (g)
screen, press switch F6 again. The input value will be sent
out.
If switch F5 is pressed when the message "Do you send
Numeric Input?" is displayed, the message reply screen
will appear. At this time, the previous input value will be
cleared.
EXPLANATION OF COMPONENTS
3-93
Advertisement
Chapters
Table of Contents
