Table of Contents
Advertisement
EXPLANATION OF COMPONENTS
CLOCK ADJUSTMENT
"Clock Adjustment" menu is used to change the setting of the clock displayed on the standard screen of the
monitor.
1.
Select "Clock Adjustment" (3) on "Monitor Setting" menu
screen.
2.
Press switch F6.
3.
The screen changes to "Clock Adjustment" screen.
The following 5 items can be changed.
(a): "GPS Synchronization"
(b): "Calendar"
(c): "Time"
(d): "12h/24h Mode"
(e): "Daylight Saving Time"
REMARK
•
2 items of "Calendar" (b) and "Time" (c) need to be
readjusted since they are reset after a long-term stor-
age.
•
When the "GPS Synchronization" is set to ON, they
are automatically readjusted.
4.
Perform the following setup procedure by operating switches F3 to F6 on "Clock Adjustment" screen.
GPS SYNCHRONIZATION SETTING
On machines equipped with KOMTRAX, turning on "GPS Syn-
chronization" menu enables automatic setting of the monitor's
date and time in accordance with the clock of GPS.
F3: Moves to the next item (1 line below). Moves to the top line
when on the bottom line.
F4: Moves to the previous item (1 line above). Moves to the
bottom line when on the top line.
F5: Cancels change and returns to "Clock Adjustment" screen.
F6: Displays the setting screen for selected item.
REMARK
•
When the machine is in the environment where the radio
waves from GPS cannot be received, such as inside of a
building, the automatic setting function may not work.
•
While"GPS synchronization" menu is turned on, the menu
for "Calendar" (b) and "Time" (c) cannot be selected.
3-84
OPERATION
Advertisement
Chapters
Table of Contents
