MACHINE OPERATIONS AND CONTROLS
METHOD FOR STOPPING MACHINE
k
k
•
Avoid a sudden stop. Stop the machine gradually.
•
Do not park the machine on a slope.
If it is unavoidably necessary to park the machine on a
slope, place parking brake lever (1) in LOCK position
and insert blocks underneath the track shoes to pre-
vent the machine from moving. As an additional safety
measure, thrust the work equipment into the ground.
•
If the blade control lever is touched by accident, the
blade may suddenly move, and this may lead to a seri-
ous accident. Before leaving the operator's seat, al-
ways secure work equipment lock lever (2) in LOCK
position.
1.
Depress decelerator/brake pedal (3).
2.
Return joystick (steering, directional and gear shift lever)
(4) back to NEUTRAL position (N).
The machine stops.
To keep the machine stopped further, depress decelerator/
brake pedal (3) until depressing effort becomes large.
3-202
WARNING
OPERATION