MACHINE OPERATIONS AND CONTROLS
Blade
Distance be-
edge an-
tween joints (B)
gle (A)
Lengthen than
Increas-
the standard
es
length
Shorten than the
Decreas-
standard length
es
Set to standard
Becomes
length
standard
4.
After adjustment, check that top faces of rods (8) and (9)
are not twisted each other.
5.
Install cover (3).
6.
Install bolts (2) (2 pieces).
3-220
Method
Install the cover (3) inside out.
Set grease fitting (4) to the position
of V-shape groove (5) on the cover
(3).
Be sure to set so since lengthening
more can cause damage.
Set grease fitting (4) to the position
of V-shape groove (6) on the cover
(3).
Be sure to set so since shortening
more can cause damage.
Set grease fitting (4) to the position
of V-shape groove (7) on the cover
(3).
OPERATION