EXPLANATION OF COMPONENTS
4.
Check the setting of each item (on the left of the screen).
5.
Press switch F3 or F4 to move the yellow cursor to a mem-
ory number ("M1" to "M5") to save, and press switch F6.
The setting is saved by the above operation.
METHOD FOR CALLING MEMORY
1.
Press switch F1 on "Mode Select" screen.
The mode memory call screen is displayed.
2.
Press switch F3 or F4 to move the yellow cursor to a mem-
ory number ("M1" to "M5") to call out.
As the cursor is set to the number, the setting stored in the
memory is displayed in the right side of the screen.
3.
Call out the selected setting by pressing switch F6.
3-52
OPERATION