Komatsu D61EX-24 Operation & Maintenance Manual page 102

OPERATION
3RD TRAVEL SPEED SETTING
Select "3rd Travel Speed Setting" on "Mode Select" screen,
and press switch F6.
3rd travel speed in quick shift mode can be selected out of 3
levels according to the operation.
You can increase or decrease the speed in 1 level each.
0: Increases 1 level from preset 3rd travel speed
-1: Preset 3rd travel speed
-2: Decreases 1 level from preset 3rd travel speed
For details of the travel speed setting method, see "1ST TRAV-
EL SPEED SETTING".
METHOD FOR SETTING EACH ITEM AND SAVING MEMORY
1.
Press switch F3 or F4 on "Mode Select" screen to set the
yellow cursor to the target item of setting change, and then
press switch F6.
The setting change screen for the selected item is dis-
played.
2.
Press switch F3 or F4 to move the yellow cursor to a set-
ting to change, and press switch F6.
(The figure shows an example of the setting change
screen when "Operating Mode" is selected.)
3.
After the setting change of each item is complete, press
switch F2.
The memory saving screen is displayed.
EXPLANATION OF COMPONENTS
3-51