OPERATION
SET GUIDE LINE DISPLAY MODE
1.
Select "Guide Line Display Mode" on "Screen Adjustment
(Camera)" menu.
2.
Press switch F6.
3.
"Guide Line Display Mode" setting screen is displayed.
•
"OFF": Guide lines (Outline (A), Center Line (B)) are
not displayed.
•
"Outline": Only outlines (A) that indicate the machine
width and the distance from the rear end of the ma-
chine are displayed.
•
"Center Line": Only machine center line (B) is dis-
played.
•
"All": Both of Outline (A) and Center Line (B) are dis-
played.
On this screen, it is possible to perform the following operations
with switches F3 to F6.
F3: Moves to the next item (1 line below). When on the last
line, it moves to the first line.
F4: Moves to the previous item (1 line above). When on the
first line, it moves to the last line.
F5: Cancels the setting and returns to the "Screen Adjustment
(Camera)" screen.
F6: Change the setting and returns to the "Screen Adjustment
(Camera)" screen.
EXPLANATION OF COMPONENTS
3-83