Komatsu D61EX-24 Operation & Maintenance Manual page 81

EXPLANATION OF COMPONENTS
PILOT DISPLAY AND METER DISPLAY
Pilot display
(1) Engine stop pilot lamp
(2) Parking brake pilot lamp
(3) Work equipment lock pilot lamp
(4) Aftertreatment devices regeneration pilot lamp
(5) Aftertreatment devices regeneration disable pilot
lamp
(6) Message display
(7) Operating mode display
Meter display
(15) Service meter/clock
(16) Hydraulic oil temperature gauge
(17) ECO gauge or drawbar pull gauge
(18) Engine coolant temperature gauge
PILOT DISPLAY
The pilot display at the top of the screen consists of the pilot lamps to check the actuation of each function.
When the starting switch is turned on and the display items are functioning, the pilot lamps light up.
PREHEATING PILOT LAMP
The preheating pilot lamp is displayed while the engine is pre-
heated before starting at temperature below -3 °C {26.6 °F} .
When the temperature is low (in cold weather) and the auto-
matic preheating function operates, the preheating pilot lamp
lights up. When the preheating is completed, it goes out.
Automatic preheating is for a maximum of approximately 45
seconds.
3-30
(8) Steering mode display
(9) Preheating pilot lamp
(10) Fan reverse rotation pilot lamp
(11) FLOAT mode pilot lamp
(12) Blade mode display
(13) Guidance display
(14) Speed range display
(19) Multi-gauge
(20) Fuel gauge
(21) DEF level gauge
(22) Fuel consumption gauge
OPERATION