Komatsu D61EX-24 Operation & Maintenance Manual page 140

OPERATION
ID KEY INFORMATION
ID number (A) of ID key inserted into the starting switch can be
checked with ID key information menu (5).
OPERATOR ID
You can check and change the "Operator ID" which is under identification on the "Operator ID" menu.
The "Operator ID" menu is not displayed when the operator identification function is disabled.
REMARK
Contact your Komatsu distributor for details of the method of setting, changing, or canceling the operator identi-
fication function.
WHEN OPERATOR IDENTIFICATION FUNCTION IS AVAILABLE WITH SKIP
When the starting switch is ON and ID is inputted, the identified
ID is displayed in the column of "Operator ID" on the "Monitor
Setting" menu screen.
When the starting switch is ON and "SKIP" is selected, "****" is
displayed in the column of "Operator ID" on the "Monitor Set-
ting" menu screen.
1.
Select "Operator ID" (6) on the "Monitor Setting" menu
screen, then press switch F6 for 1 second.
EXPLANATION OF COMPONENTS
3-89