Table of Contents
Advertisement
intrusions.
Setting the intrusion sensor and tilt
■
sensor
The intrusion sensor and tilt sensor will
be set automatically when the alarm is
set. (P.83)
Canceling the intrusion sensor and
■
tilt sensor
If you are leaving pets or other moving
things inside the vehicle, make sure to
disable the intrusion sensor and tilt
sensor before setting the alarm, as it
will respond to movement inside the
vehicle.
1
Turn the engine switch <power
switch> off.
2
Press the intrusion sensor and tilt
sensor cancel switch.
Press the switch again to re-enable the
intrusion sensor and tilt sensor.
Each time the intrusion sensor and tilt sen-
sor are canceled/set, a message will be
shown on the multi-information display in
the instrument cluster.
Canceling and automatic re-enabling of
■
the intrusion sensor and tilt sensor
The alarm will still be set even when the
●
intrusion sensor and tilt sensor are can-
celed.
●
After the intrusion sensor and tilt sensor
1-4. Theft deterrent system
are canceled, pressing the engine switch
<power switch> or unlocking the doors
using the entry function or wireless
remote control will re-enable the intru-
sion sensor and tilt sensor. (Except for
South Africa and Malaysia, the mechani-
cal key can also be used.)
●
The intrusion sensor and tilt sensor will
automatically be re-enabled when the
alarm system is deactivated.
Intrusion sensor detection consider-
■
ations
The sensor may trigger the alarm in the fol-
lowing situations:
People or pets are in the vehicle.
●
●
A window is open.
In this case, the sensor may detect the fol-
lowing:
• Wind or the movement of objects such as
leaves and insects inside the vehicle
• Ultrasonic waves emitted from devices
such as the intrusion sensors of other
vehicles
• The movement of people outside the
vehicle
Unstable items, such as dangling acces-
●
sories or clothes hanging on the coat
hooks, are in the vehicle.
85
1
Advertisement
Table of Contents
