Type A
Normal fuse
A
Blown fuse
B
Type B
Normal fuse
A
Blown fuse
B
Type C
Normal fuse
A
Blown fuse
B
6-3. Do-it-yourself maintenance
Type D
Normal fuse
A
Blown fuse
B
After a fuse is replaced
■
When installing the lid, make sure that the
●
tab is installed securely.
●
If the lights do not turn on even after the
fuse has been replaced, a bulb may need
replacement. (P.370)
If the replaced fuse blows again, have the
●
vehicle inspected by your Lexus dealer.
If there is an overload in a circuit
■
The fuses are designed to blow, protecting
the wiring harness from damage.
When replacing light bulbs
■
Lexus recommends that you use genuine
Lexus products designed for this vehicle.
Because certain bulbs are connected to cir-
cuits designed to prevent overload, non-
genuine parts or parts not designed for this
vehicle may be unusable.
WARNING
■
To prevent system breakdowns and
vehicle fire
Observe the following precautions.
Failure to do so may cause damage to
the vehicle, and possibly a fire or injury.
●
Never use a fuse of a higher amperage
rating than that indicated, or use any
other object in place of a fuse.
369
6