Table of Contents
Advertisement
244
4-5. Using the driving support systems
1
Increases the speed
2
Decreases the speed
Fine adjustment: Press the switch.
Large adjustment: Press and hold the
switch to change the speed, and
release when the desired speed is
reached.
In the vehicle-to-vehicle distance con-
trol mode, the set speed will be
increased or decreased as follows:
Fine adjustment: By 1 km/h (0.6 mph)
*2
mph (1.6 km/h)
each time the switch is
pressed
Large adjustment: Increases or decreases
*1
in 5 km/h (3.1 mph)
or 5 mph (8 km/h)
increments for as long as the switch is held
In the constant speed control mode
(P.245), the set speed will be
increased or decreased as follows:
Fine adjustment: By 1 km/h (0.6 mph)
*2
mph (1.6 km/h)
each time the switch is
pressed
Large adjustment: The speed will continue
to change while the switch is held.
*1
: When the set speed is shown in "km/h"
*2
: When the set speed is shown in "MPH"
Changing the vehicle-to-vehicle
distance (vehicle-to-vehicle dis-
tance control mode)
Pressing the switch changes the vehi-
cle-to-vehicle distance as follows:
1
Long
2
Medium
3
Short
The vehicle-to-vehicle distance is set auto-
matically to long mode when the engine
*1
or 1
switch <power switch> is turned to IGNI-
TION ON mode <ON mode>.
If a vehicle is running ahead of you, the pre-
ceding vehicle mark
*2
played.
Vehicle-to-vehicle distance set-
tings (vehicle-to-vehicle dis-
tance control mode)
*1
or 1
Select a distance from the table below.
Note that the distances shown corre-
spond to a vehicle speed of 80 km/h
(50 mph). Vehicle-to-vehicle distance
increases/decreases in accordance
with vehicle speed.
A
will also be dis-
Advertisement
Table of Contents
