Table of Contents
Advertisement
The RCTA function is on.
●
●
The shift position is in R.
The vehicle speed is less than approxi-
●
mately 8 km/h (5 mph).
●
The approaching vehicle speed is
between approximately 8 km/h (5 mph)
and 28 km/h (18 mph).
Conditions under which the RCTA func-
■
tion will not detect a vehicle
The RCTA function is not designed to
detect the following types of vehicles and/or
objects:
●
Vehicles approaching from directly
behind
Vehicles backing up in a parking space
●
next to your vehicle
●
Vehicles that the sensors cannot detect
due to obstructions
Guardrails, walls, signs, parked vehicles
●
and similar stationary objects
●
Small motorcycles, bicycles, pedestrians,
*
etc.
●
Vehicles moving away from your vehicle
Vehicles approaching from the parking
●
spaces next to your vehicle
*
: Depending on the conditions, detection
of a vehicle and/or object may occur.
■
Conditions under which the RCTA func-
tion may not function correctly
●
The RCTA function may not detect vehi-
cles correctly in the following situations:
• When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area
• When mud, snow, ice, a sticker, etc. is
covering the sensor or surrounding area
4-5. Using the driving support systems
on the rear bumper
• When driving on a road surface that is
wet with standing water during bad
weather, such as heavy rain, snow, or fog
• When multiple vehicles are approaching
with only a small gap between each vehi-
cle
• When a vehicle is approaching at high
speed
• When a towing eyelet is installed to the
rear of the vehicle.
• When backing up on a slope with a sharp
change in grade
• When backing out of a shallow angle
parking spot
*
*
• Immediately after the RCTA function is
turned on
• Immediately after the engine <hybrid sys-
tem> is started with the RCTA function on
• When the sensors cannot detect a vehi-
cle due to obstructions
267
4
Advertisement
Table of Contents
