Turn signal lever
Operating instructions
1
Right turn
2
Lane change to the right (move the
lever partway and release it)
The right hand signals will flash 3 times.
3
Lane change to the left (move the
lever partway and release it)
The left hand signals will flash 3 times.
4
Left turn
Turn signals can be operated when
■
The engine switch <power switch> is in
IGNITION ON mode <ON mode>.
If the indicator flashes faster than usual
■
Check that a light bulb in the front or rear
turn signal lights has not burned out.
If the turn signals stop flashing before a
■
lane change has been performed
Operate the lever again.
4-2. Driving procedures
Customization
■
P.436
183
4