Table of Contents
Advertisement
258
4-5. Using the driving support systems
Multi-information display
A
The BSM function/RCTA function can be
turned on/off.
The RCTA function is available when the
BSM function is on.
Outside rear view mirror indicators
B
BSM function:
When a vehicle is detected in a blind spot
of the outside rear view mirrors or
approaching rapidly from behind into a
blind spot, the outside rear view mirror
indicator on the detected side will illumi-
nate. If the turn signal lever is operated
toward the detected side, the outside rear
view mirror indicator will flash.
RCTA function:
When a vehicle approaching from the right
or left at the rear of the vehicle is detected,
both outside rear view mirror indicators
will flash.
BSM indicator/RCTA indicator
C
When the BSM function/RCTA function is
turned on, the indicator comes on.
Monitor screen display (RCTA
D
function only)
If a vehicle approaching from the right or
left at the rear of the vehicle is detected,
the RCTA icon (P.265) for the detected
side will be displayed on the monitor
screen. This illustration shows an example
of a vehicle approaching from the left at the
rear of the vehicle.
RCTA buzzer (RCTA function only)
E
If a vehicle approaching from the right or
left at the rear of the vehicle is detected, a
buzzer will sound. The buzzer also sounds
for approximately 1 second immediately
after the BSM function is operated to turn
the system on.
Turning the BSM function/RCTA
function on/off
1
Press
or
of the meter con-
trol switches, select
2
Press
or
of the meter con-
trol switches, select "BSM", and
press "OK".
3
Press
or
of the meter con-
trol switches, select "BSM" or
"RCTA", and press "OK".
Outside rear view mirror indicator visi-
■
bility
In strong sunlight, the outside rear view mir-
ror indicator may be difficult to see.
Hearing the RCTA buzzer
■
The RCTA buzzer may be difficult to hear
over loud noises, such as if the audio system
volume is high.
When "Blind Spot Monitor Unavailable"
■
is shown on the multi-information dis-
play
Water, snow, mud, etc., may be built up in
the vicinity of the sensor area of the bumper.
Removing the water, snow, mud, etc., from
the vicinity of the sensor area of the bumper
should return it to normal.
Also, the sensor may not function normally
when used in extremely hot or cold weather.
When "Blind Spot Monitor System Mal-
■
function" is shown on the multi-informa-
tion display
There may be a sensor malfunction or volt-
age abnormality. Have the vehicle
inspected at your Lexus dealer.
■
Customization
Some functions can be customized.
(Customizable features: P.436)
.
Advertisement
Table of Contents
